Zeez F7 2-8s FC + 60A Esc + 4 Racing LED Stack

Elfogyott

Leírás

Zeez Design - Zeez 3030 Stack  - Zeez F7 FC - Zeez 60A 4-in-1 ESC - Zeez LED System

Whether you are taking the podium on race day or ripping packs at bandos the Zeez F7 3030 Stach with LED combo set will have you doing it in style.

Zeez F7 Betaflight FC Features
★Up to 8S input (max 36V)
★5V BEC up to 3A continuous
★STM32F722 MCU
★MPU6000 Gyro/ACC for smooth performace
★128MB OnBoard flash
★OSD chip Onboard
★6 available UARTS
★VTX switch to control the ON/OFF of the VTX
★directly from your transmitter
★LC Filter for 5V VTX
★USB Type C connector
★Onboard RGB LED distribution for clean wiring to the LED on the arm of the quad.
★Notch desing on sides and in the front of the – FC for better fitting on the frame.
User Manual
Betaflight OSD Custom Logo

Zeez 60A 4-in-1 BLheli_32 Features
★ Input: 3S-6S
★ High quality Toshiba Mosfet: 60A continuous current draw /90A peak current
★ Firmware: BlHeli32 ZEEZ60A
★ Aluminum HeatSink to cooldown the Mosfet.
★ Including 35V 470uF Low ESR Capacitor (and spare capacitor)
★ Easy wiring with connector included in package with Zeez F7 Flight Controller
★ Bidirectional DSHOT capable for RMP filtering
★ Dimension: 37,50mm * 43mm

Zeez LED System Features
★ Zeez Led System includes 4 strips of rgb led light
★ 10 RBG Led on each strip
★ Max Current Draw (10 led on on white colour): 0.6A @ 5V
★ Easy wiring to Zeez F7 Flight controller and easy control with BetaFlight
★ Dimension 35mmx7.5mm (the smallest RBG strip for racing drone on the market)

Racing combo includes:
(1X) Zeez F7 Flight Controller
(1X) Zeez 60A 4in1 ESC
(1X) Zeez Led System (4 led Strip)
(4X) Aluminium Stanoff
(4X) Aluminium Nut
(2X) ESC to Flight Controller 8 Pin JST SH 1.00mm connector
(6X) Led Strip to Flight Controller 3 pin JST SH 1.00mm connector
(2x) 470uF 35V Low ESR Capacitor
(1X) XT60 with 12AWG Silicon Cable for battery connection
(2X) 2.00mm Header Pin for VTX connection
(2X) 2.54mm Header Pin for Receiver connection
(2X) Spare M3 rubber anti vibration for Flight Controller or ESC

Figyelem! Ha a repülés vezérlő nem indul el csak usb-ről, akkor a hibajelenséget csak akkor tudjuk garanciálisan elfogadni, ha még nem történt ráforrasztás a repülés vezérlőre. Forrasztás előtt kérjük, hogy mindig ellenőrizzétek! Forrasztási hibákból keletkezett hibákat garanciálisan nem tudjuk javítani.